Solar Ground Mounting
ApexGround Adjust Manual Tilt System
Manually adjustable ground mounting system for projects requiring seasonal tilt flexibility.
Solar Ground Mounting
Solar Ground Mounting Systems
Ground mounting structures for commercial fields and utility-scale PV projects. Apex provides datasheets, quick specifications and project review support for this product family.
Request Project Review
Product range
5 systems in this family
Open a product page to review parameters, components, downloads and quotation inputs.
Solar Ground Mounting
ApexGround PilePro System
Utility-ready driven pile ground mounting platform with foundation sizing and corrosion review.
Solar Ground Mounting
ApexGround GT2 Terrace System
Terrace ground mounting system for commercial and utility projects with flexible terrain adaptation.
Solar Ground Mounting
ApexGround ScrewBase System
Ground screw mounting structure for projects that require fast installation and reduced concrete work.
Solar Ground Mounting
ApexGround HighLift System
High-clearance ground mounting system for agrivoltaic, special terrain and elevated PV applications.
Compare systems
Solar Ground Mounting comparison
Side-by-side review values for the 5 Apex solar ground mounting systems. Use this table for first screening, then open the product page for the full specification and datasheet.
| System | Application | Tilt Angle | Wind Load | Snow Load | Material |
|---|---|---|---|---|---|
| ApexGround Adjust Manual Tilt System | Open-field commercial and small utility PV projects | 10/15/20/25/30° standard; optional by project | Up to 40-60 m/s (134 mph) by stow and terrain | Up to 1.6 kN/m² (33 psf) by span and tilt | AL6005-T5 and HDG steel by BOM |
| ApexGround PilePro System | Utility PV plants and commercial solar fields | 10/15/20/25/30° standard | Up to 60 m/s (134 mph) | Up to 1.6 kN/m² (33 psf) | Q235B/Q355B HDG steel structure with AL6005-T5 rails and SUS304/HDG fasteners by order scope |
| ApexGround GT2 Terrace System | Open-field and terrace ground solar projects | 10/15/20/25/30° standard | Up to 60 m/s (134 mph) by terrain | Up to 1.6 kN/m² (33 psf) by span, tilt, roof zone or foundation layout | AL6005-T5 and HDG steel by BOM |
| ApexGround ScrewBase System | Commercial fields, open land and ground screw foundation projects | 10/15/20/25/30° standard | Up to 60 m/s (134 mph) by project review | Up to 1.6 kN/m² (33 psf) by span | Q235B/Q355B HDG steel structure with AL6005-T5 rails and SUS304/HDG fasteners by order scope |
| ApexGround HighLift System | Agrivoltaic, high-clearance and special terrain PV projects | 10/15/20/25/30° standard | Up to 50-60 m/s (134 mph) by height and bracing | Up to 1.6 kN/m² (33 psf) by span, tilt, roof zone or foundation layout | Q235B/Q355B HDG steel with AL6005-T5 rails |
Selection guide
How to review Solar Ground Mounting before quotation
Ground mounting projects are driven by foundation condition, terrain and installation workflow. A product name alone is not enough to decide between driven pile, ground screw, terrace or high-clearance structures. Apex reviews soil information, pull-out data, slope, corrosion exposure, row spacing and module layout so the mounting package can match both structure cost and site installation reality.
Foundation choice
Driven pile systems are widely used where soil conditions and installation equipment support pile driving. Ground screw systems can reduce concrete work and help with fast installation or some sloped sites. Terrace and high-clearance options are considered when terrain, agrivoltaic use or access clearance changes the structural model.
Technical inputs
Before quotation, prepare geotechnical report, pull-out test if available, terrain drawing, frost depth where relevant, corrosion class, module layout and local wind/snow basis. These inputs affect pile or screw depth, post spacing, table span and steel section.
Apex review output
Apex can align the ground mounting family, foundation direction, preliminary design envelope, material scope and datasheet package for buyer comparison. Final foundation sizing remains tied to local structural calculation and site test results.
RFQ preparation
Inputs that make Solar Ground Mounting review faster
These items help Apex reduce assumptions before quotation. They are not final structural approval documents; final values should be confirmed by the project design basis and local engineering review.
01Geotechnical report02Pull-out test03Terrain slope04Corrosion class05Row layout
Selection inputs for Solar Ground Mounting
Project locationWind and snow loadsModule datasheetLayout drawingCorrosion classDelivery schedule
Buyer FAQ
Solar Ground Mounting questions
Common questions buyers ask before selecting an Apex mounting system.
Driven pile or ground screw: which foundation is better?
Driven pile systems are common for utility fields with suitable soil and pull-out data. Ground screw systems can reduce concrete work and help on some sloped or fast-installation sites.
Does Apex provide fixed tilt and adjustable ground systems?
Yes. Apex ground mounting includes driven pile, screw base, terrace, high-clearance and manually adjustable structures for different terrain and project needs.
What ground project data should be prepared?
Prepare geotechnical report, pull-out test if available, terrain information, module layout, corrosion class and local wind/snow basis.
Knowledge base
Solar Ground Mounting Systems selection guides
Selection guides written for EPCs, distributors and installers evaluating this product family.
Industry Insight
Ground Screw vs Driven Pile Solar Mounting System
How soil data, pull-out test, installation speed and corrosion exposure affect foundation selection.
Technical Guide How Wind and Snow Loads Affect Solar Mounting Structure DesignWhy load basis, roof zone, span and terrain category matter before final mounting selection.
Buyer Guide What Project Data Is Needed for Solar Mounting System Quotation?The site, module, wind, snow, corrosion and layout inputs Apex needs for a faster BOM and quotation.