Products / Solar Roof Mounting

ApexRoof Ballast EW Flat Roof System

East-west flat roof ballasted system for dense roof layouts and balanced project yield.

ApexRoof Ballast EW Flat Roof System product structure
Quick specification

Key project review values

Use these parameters for first screening. Apex aligns final load basis, dimensions and BOM with project inputs.

ApplicationCommercial flat roof east-west PV layouts
Tilt Angle5-15° typical
InterfaceBallasted flat roof by roof structure
Wind LoadUp to 60 m/s (134 mph) by roof zone
Snow LoadUp to 1.6 kN/m² (33 psf) by project
Warranty12-year product warranty
MaterialAL6005-T5 anodized aluminum, SUS304 fasteners and interface-specific sealing parts
FinishAnodized aluminum finish; stainless fasteners; EPDM or waterproof interface parts where required
Module CompatibilityFramed modules, typical 30-50 mm frame; clamp zone and rail spacing by module installation guide
Design BasisASCE 7-16/7-22, IBC 2021/2024, EN 1991/1993/1999, AS/NZS 1170 and local roof code by project
Design Life25-year design service life target by project condition
Engineering OutputLayout drawing, structural calculation basis, BOM/MTO, packing list and material documentation by order scope
RFQ preparation

Get this system matched to your project scope

For faster review, send the module datasheet, layout drawing, local wind/snow basis and the roof, foundation or anchoring condition. The Apex engineering team replies within one working day.

Project location and codeModule datasheetLayout drawingInterface or soil data
Advantages

Why buyers specify this system

Practical advantages focused on installation, matching and project review.

East-west roof layout

Matched to the roof profile, sheet thickness and purlin condition so the fixing method suits the actual surface.

Higher roof coverage potential

Waterproofing interface, sealing parts and clamp zone are reviewed before the BOM is released.

Ballast and wind review

Fixing density is balanced against roof-zone wind uplift for the specific array layout.

Modular installation sequence

Short-rail and clamp detailing reduces components and on-site installation time.

Engineering support

Apex helps define the design envelope, system interface, component scope and quotation-ready BOM. This product is supported by a customer technical datasheet.

Download ApexRoof Ballast EW Flat Roof System datasheet

FAQ

What project data is needed for quotation?

Apex needs project location, module datasheet, layout drawing, wind and snow load basis, roof or foundation condition and delivery schedule.

Are final loads fixed by the datasheet?

Datasheets provide a review envelope. Final values are confirmed by local code, site condition, structural calculation and order BOM.

Can Apex support BOM and documentation?

Yes. Apex can support layout drawing, optimized BOM, packing list and material documentation by order scope.

Related products

More solar roof mounting options

Compare adjacent systems in the same product family.

Knowledge base

Technical guides

Selection guides written for EPCs, distributors and installers evaluating this product family.